Exhibition construction to build commonly used material introduction
2014-05-28
Material type: wood, stone, metal, glass, ceramics, paint, plastic, synthetic materials, adhesives, metal products, textile materials, metal jewelry.
1, wood:
A, hardwood: Willow, Phoebe, fruit trees (pear), white wax, birch (neutral). Characteristics, pattern obvious, easy to deformation damage. Should do furniture, do veneer decoration materials, high prices.
B, cork: pine (white pine, red pine) Paulownia, poplar. Characteristics, do structure, wood side, poor corrosion resistance, poor bending resistance, can not do furniture.
C, synthetic wood: the exhibition industry to the main board.
* Plywood, three layers of 1mm wood (or called veneer) staggered superimposed, commonly used as furniture side panels and finishes (pear, beech is made of such processing. Specifications, 1220x2440mm / 20 ~ 45 yuan.
* Synthetic board, five-plate, nine-plate, used to make the structure, can be bent.
* Big core board, in order to overcome the deformation of wood and raw, two layers of wood to fill small pieces of wood, according to the middle of the different materials ranging from the price range. Often 15 ~ 18mm thick, 40 to 60 yuan or 120 to 150 yuan unit price.
* Wood side, unified 4000mm long, white pine 1 cubic meter 1200 ~ 1500 yuan, 1 million square meters of pine trees 1400 ~ 1600 yuan, 1 million cubic meters of wood 5000-6000 yuan.
* Compression board, particleboard (compressed with shavings and sawdust), MDF (with greater pressure plus adhesive, pressure, for furniture). Not easy to nail, fear of water droplets wet.
* Composite board,
2, stone:
Granite (the highest hardness, fine pattern, commonly used for finishes), marble (hardness is not high, large pattern), bluestone, rubble, pebbles, stone.
3, metal materials:
A, iron:
* Plate (iron), thick iron 2 ~ 200mm;
Thin iron 1 ~ 2mm sub-cold black iron (black iron, angle iron, can paint), galvanized white metal (rust, can not paint, a pattern). Specifications, 1200x2400mm, a thick 100 yuan.
* Wire, angle (three edges, four edges), I-beam (do large structure), channel (do large structure), square steel, flat iron, length 6000mm.
* Pipe, pipe is divided into seamless pipe (high cost); pipe; thin-walled tube, do decorative, the minimum diameter of 16mm. Square tube, thin-walled (2mm thick), made with the smallest diameter 12mm, commonly used 20mm.
* Profiles, steel; steel; trusses (round pipe or square tube plus steel).
B, stainless steel: features, no rust, toughness, strength, but the price is high
* Plate, white board; titanium plate; drawing board; mirror plate; matt board. Specifications, 1220x2440mm / 1220x3000mm / 1200x4000mm, thickness 0.3 ~ 2.5mm, commonly used mm thick. Price 500 ~ 600 yuan (1200x2400).
* Wire, tube; square tube. Are used for decoration, high prices.
* Stainless steel products, mirror nails, nickel plated.
C, aluminum: than steel widely used, cheaper than steel, light
* Plate, rarely used, low strength, easy to oxidize black.
* Profiles, aluminum windows, aluminum doors.
D, copper, rarely used.
4, glass:
A, white glass, also known as green glass, colorless glass, 4 ~ 5mm thick, used as windows.
B, tempered glass,
C, woolen glass,
D, embossed glass,
E, glass tiles, insulating glass, stained glass, mirrors,
F, glass carving.
5, ceramics: home decoration of the protagonist,
6, paint:
A, paint, construction period is long,
* Nitro paint, hard, good quality, shiny, dry fast, high prices.
* Alkyd paint, soft, sub-varnish, colored paint, dry slowly.
* Thinner, nitro lean, alkyd thinner.
B, paint, latex paint, matt, dark slot lights with latex paint. Really stone paint, imitate the rock texture, can make relief effect.
7, plastic: widely used.
A, sun panels, hollow, can be bent with a variety of colors, processing is simple, subject to specifications, high prices, thickness of 8mm, 10mm, 15mm, length 3000mm, 4000mm, 6000mm.
B, organic board, transparent organic board and colored organic board, color limited to solid color and brown, crisp, easy to damage easily, size 1200x1800mm, the thickness of the thinnest 0.4mm thick, commonly used 2mm, 3mm, 4mm, 5mm, $ 70 (same as glass).
C, white organic board (film),
* Milk white (milky white), translucent, slightly yellow.
* Light box, a variety of colors, translucent diffuse reflection.
* Porcelain white, opaque, used as veneer.
D, acrylic, transparent acrylic (Crystal effect), colored acrylic, acrylic box (expensive). The price is much higher than the organic board, but the grade is much higher, high hardness, not fragile, translucent effect is good.
E, plastic PVC pipe, lighter than the iron pipe, cheap. Gray and white, can be heated when heated, elbow can be used, three-way elbow docking. Diameter minimum 150mm, maximum 500mm, commonly used 400mm.
8, synthetic materials:
A, aluminum-plastic plate, two layers of aluminum plastic folder in the middle folder, corrosion-resistant.
B, fire board (paper), the thickest 2mm, commonly used 1mm.
9, textiles:
A, elastic cloth, translucent, a variety of colors, can do simple printing.
B, stretch yarn, more expensive than the elastic cloth.
10, an adhesive: Multipurpose adhesive; strong plastic (viscosity fire board, glue stick 3.5 barrel plate, aluminum plate, waterproof) white gum (viscosity wood, avoid water); glass paste (viscosity object smooth, tack Strong, waterproof); instant glue.
11, hardware materials: nails
12, metal jewelry.
13, inkjet:
A, printing cloth: Po Li Bu (inelastic) a maximum width of 5000mm, 18 yuan / square meter; silver eagles cloth; mesh cloth (gauze with translucent eyes).
B, pictorial inkjet, the machine is small, the widest 1500mm, clear point 720 points,
* Film base, plastic; light box (direct spray).
* Paper-based, Beijiao photo paper, can be covered cloth film, sub-film, bright film, can be attached to the KT board.
1, wood:
A, hardwood: Willow, Phoebe, fruit trees (pear), white wax, birch (neutral). Characteristics, pattern obvious, easy to deformation damage. Should do furniture, do veneer decoration materials, high prices.
B, cork: pine (white pine, red pine) Paulownia, poplar. Characteristics, do structure, wood side, poor corrosion resistance, poor bending resistance, can not do furniture.
C, synthetic wood: the exhibition industry to the main board.
* Plywood, three layers of 1mm wood (or called veneer) staggered superimposed, commonly used as furniture side panels and finishes (pear, beech is made of such processing. Specifications, 1220x2440mm / 20 ~ 45 yuan.
* Synthetic board, five-plate, nine-plate, used to make the structure, can be bent.
* Big core board, in order to overcome the deformation of wood and raw, two layers of wood to fill small pieces of wood, according to the middle of the different materials ranging from the price range. Often 15 ~ 18mm thick, 40 to 60 yuan or 120 to 150 yuan unit price.
* Wood side, unified 4000mm long, white pine 1 cubic meter 1200 ~ 1500 yuan, 1 million square meters of pine trees 1400 ~ 1600 yuan, 1 million cubic meters of wood 5000-6000 yuan.
* Compression board, particleboard (compressed with shavings and sawdust), MDF (with greater pressure plus adhesive, pressure, for furniture). Not easy to nail, fear of water droplets wet.
* Composite board,
2, stone:
Granite (the highest hardness, fine pattern, commonly used for finishes), marble (hardness is not high, large pattern), bluestone, rubble, pebbles, stone.
3, metal materials:
A, iron:
* Plate (iron), thick iron 2 ~ 200mm;
Thin iron 1 ~ 2mm sub-cold black iron (black iron, angle iron, can paint), galvanized white metal (rust, can not paint, a pattern). Specifications, 1200x2400mm, a thick 100 yuan.
* Wire, angle (three edges, four edges), I-beam (do large structure), channel (do large structure), square steel, flat iron, length 6000mm.
* Pipe, pipe is divided into seamless pipe (high cost); pipe; thin-walled tube, do decorative, the minimum diameter of 16mm. Square tube, thin-walled (2mm thick), made with the smallest diameter 12mm, commonly used 20mm.
* Profiles, steel; steel; trusses (round pipe or square tube plus steel).
B, stainless steel: features, no rust, toughness, strength, but the price is high
* Plate, white board; titanium plate; drawing board; mirror plate; matt board. Specifications, 1220x2440mm / 1220x3000mm / 1200x4000mm, thickness 0.3 ~ 2.5mm, commonly used mm thick. Price 500 ~ 600 yuan (1200x2400).
* Wire, tube; square tube. Are used for decoration, high prices.
* Stainless steel products, mirror nails, nickel plated.
C, aluminum: than steel widely used, cheaper than steel, light
* Plate, rarely used, low strength, easy to oxidize black.
* Profiles, aluminum windows, aluminum doors.
D, copper, rarely used.
4, glass:
A, white glass, also known as green glass, colorless glass, 4 ~ 5mm thick, used as windows.
B, tempered glass,
C, woolen glass,
D, embossed glass,
E, glass tiles, insulating glass, stained glass, mirrors,
F, glass carving.
5, ceramics: home decoration of the protagonist,
6, paint:
A, paint, construction period is long,
* Nitro paint, hard, good quality, shiny, dry fast, high prices.
* Alkyd paint, soft, sub-varnish, colored paint, dry slowly.
* Thinner, nitro lean, alkyd thinner.
B, paint, latex paint, matt, dark slot lights with latex paint. Really stone paint, imitate the rock texture, can make relief effect.
7, plastic: widely used.
A, sun panels, hollow, can be bent with a variety of colors, processing is simple, subject to specifications, high prices, thickness of 8mm, 10mm, 15mm, length 3000mm, 4000mm, 6000mm.
B, organic board, transparent organic board and colored organic board, color limited to solid color and brown, crisp, easy to damage easily, size 1200x1800mm, the thickness of the thinnest 0.4mm thick, commonly used 2mm, 3mm, 4mm, 5mm, $ 70 (same as glass).
C, white organic board (film),
* Milk white (milky white), translucent, slightly yellow.
* Light box, a variety of colors, translucent diffuse reflection.
* Porcelain white, opaque, used as veneer.
D, acrylic, transparent acrylic (Crystal effect), colored acrylic, acrylic box (expensive). The price is much higher than the organic board, but the grade is much higher, high hardness, not fragile, translucent effect is good.
E, plastic PVC pipe, lighter than the iron pipe, cheap. Gray and white, can be heated when heated, elbow can be used, three-way elbow docking. Diameter minimum 150mm, maximum 500mm, commonly used 400mm.
8, synthetic materials:
A, aluminum-plastic plate, two layers of aluminum plastic folder in the middle folder, corrosion-resistant.
B, fire board (paper), the thickest 2mm, commonly used 1mm.
9, textiles:
A, elastic cloth, translucent, a variety of colors, can do simple printing.
B, stretch yarn, more expensive than the elastic cloth.
10, an adhesive: Multipurpose adhesive; strong plastic (viscosity fire board, glue stick 3.5 barrel plate, aluminum plate, waterproof) white gum (viscosity wood, avoid water); glass paste (viscosity object smooth, tack Strong, waterproof); instant glue.
11, hardware materials: nails
12, metal jewelry.
13, inkjet:
A, printing cloth: Po Li Bu (inelastic) a maximum width of 5000mm, 18 yuan / square meter; silver eagles cloth; mesh cloth (gauze with translucent eyes).
B, pictorial inkjet, the machine is small, the widest 1500mm, clear point 720 points,
* Film base, plastic; light box (direct spray).
* Paper-based, Beijiao photo paper, can be covered cloth film, sub-film, bright film, can be attached to the KT board.